Light Lifter
The DC Light Lifter is an economical lifter that was designed to lift lightweight props (up to 25lbs).
Lifter provides 23” of vertical lift from a starting point of approximately 8.5″ up to 31″.
All DC Props raw mechanisms include a professional welded steel framed armature, bronze bushings,high quality USA made Bimba air cylinder, 12V 4 way 2 position valve with power supply, flow controls on both exhausts so you can control the lift and decent speeds, and all fittings and tubing to allow easy connection to your air compressor setup (you will need to supply a 1/4″ female threaded quick disconnect male nipple fitting that matches your existing female quick disconnect coupler – not included).
Includes mounting holes in base for safe and easy mounting. Size 12″ x 14″ x 18″
To use, simply mount the mechanism, add air, and plug in the power supply. Adding power will raise the lifter, and removing power will cause the lifter to retract to its starting position.
If you want to automate this lifter, we recommend the PicoBoo 104 (this is a 2 output controller that includes and audio player).
- Optional controller w/audio player and PIR sensor at an additional charge.
- Requires 110V power and 100-120 psi air.
$345.00
Description
PLEASE NOTE: As of our email announcement on 9/30 – the “Discounted” Light lifter is no longer available. We have cylinders for this mechanism on order with an ETA of 10/12. Mechanism will not ship before 10/13.
The DC Light Lifter is an economical lifter that was designed to lift lightweight props (up to 25lbs).
Lifter provides 23” of vertical lift from a starting point of approximately 8.5″ up to 31″.
All DC Props raw mechanisms include a professional welded steel framed armature, bronze bushings, high quality American Air air cylinder, 12V 4 way 2 position valve with power supply, flow controls on both exhausts so you can control the lift and decent speeds, and all fittings and tubing to allow easy connection to your air compressor setup (you will need to supply a 1/4″ female threaded quick disconnect male nipple fitting that matches your existing female quick disconnect coupler – not included).
Includes mounting holes in base for safe and easy mounting. Size 12″ x 14″ x 18″
To use, simply mount the mechanism, add air, and plug in the power supply. Adding power will raise the lifter, and removing power will cause the lifter to retract to its starting position.
If you want to automate this lifter, we recommend the PicoBoo 104 (this is a 2 output controller that includes and audio player).
- Optional controller w/audio player and PIR sensor at an additional charge.
- Requires 110V power and 100-120 psi air.
Additional information
| Weight | 16 lbs |
|---|---|
| Dimensions | 14 × 14 × 20 in |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.