Horizontal Mover (slide)

*This product is custom made.

The DC Horizontal Mover extends most light and mid-weight props (up to 25lbs) horizontally 18″ at a very slight angle to provide movement for ground level props (can be modified to have additional elevation lift or with no angle for parallel movement).

Originally designed to be used in holes or other low-light areas where the prop comes towards your viewers while keeping the mechanism hidden behind. This mechanism is available in our standard 18 or 24″ extension, but can also be customized to extend up to 48″ for an additional charge, please contact us for pricing on these mechanisms over 24″.

We highly recommend greasing the slide bars with Lucas Red N Tacky grease to increase the performance and longevity of this animation.  We’d do it prior to shipping, but it can drip and get messy.

Also available with no incline (level travel) or increased upwards angle (like video below) at no additional cost.

Please note the video below displays a mover with a large angle – this is not our standard setup.

  • Avail in standard 18″ or 24″ extensions, or custom sizes/angles per request
  • Optional controller w/audio player and PIR sensor available for an additional charge.
  • Requires 110V power and 100-120 psi air.

Just to be clear, the following video below is of our “old” version, the new version is as pictured in the images. Please note, we can easily modify the design to increase the elevation, just email us after ordering for specifics.

$385.00

5 in stock

Description

The DC Horizontal Mover extends most light and mid-weight props (up to 25lbs) horizontally 18″ at a very slight angle to provide movement for ground level props (can be modified to have additional elevation lift or with no angle for parallel movement).

Originally designed to be used in holes or other low-light areas where the prop comes towards your viewers while keeping the mechanism hidden behind. This mechanism is available in our standard 18 or 24″ extension, but can also be customized to extend up to 48″ for an additional charge, please contact us for pricing on these mechanisms over 24″.

We highly recommend greasing the slide bars with Lucas Red N Tacky grease to increase the performance and longevity of this animation.  We’d do it prior to shipping, but it can drip and get messy.

Also available with no incline (level travel) or increased upwards angle (like video below) at no additional cost.

Please note the video below displays a mover with a large angle – this is not our standard setup.

  • Avail in standard 18″ or 24″ extensions, or custom sizes/angles per request
  • Optional controller w/audio player and PIR sensor available for an additional charge.
  • Requires 110V power and 100-120 psi air.

Just to be clear, the following video below is of our “old” version, the new version is as pictured in the images. Please note, we can easily modify the design to increase the elevation, just email us after ordering for specifics.

Additional information

Weight 18 lbs
Dimensions 28 × 14 × 6 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.